Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-16
Syntax
tunnel flow-control
undo tunnel flow-control
View
L2TP group view
Parameter
None
Description
Use the tunnel flow-control command to enable L2TP tunnel flow-control.
Use the undo tunnel flow-control command to disable the flow-control function.
By default, the L2TP tunnel flow-control function is not performed.
Example
# Enable the flow-control function.
[Quidway-l2tp1] tunnel flow-control
1.1.22 tunnel keepstanding
Syntax
tunnel keepstanding
undo tunnel keepstanding
View
L2TP group view
Parameter
None
Description
Use the tunnel keepstanding command to enable the tunnel-hold function of L2TP,
preventing the tunnel from being disconnected when no session is present.
Use the undo tunnel keepstanding command to disable the tunnel-hold function of
L2TP.