Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-17
Caution:
To have this command take effect on a tunnel, you must configure it at both ends of the
tunnel.
Example
# Enter L2TP group view.
[Quidway] l2tp-group 1
# Enable the tunnel-hold function of L2TP.
[Quidway-l2tp1] tunnel keepstanding
1.1.23 tunnel name
Syntax
tunnel name name
undo tunnel name
View
L2TP group view
Parameter
name: Local name of the tunnel, a character string with the length ranging from 1 to 30.
Description
Use the tunnel name command to specify local name of a tunnel.
Use the undo tunnel name command to restore the local name to the default.
By default, local name is router name.
When creating an L2TP group, the system initiates local name into router name.
Related command: sysname.
Example
# Set local name of the tunnel to itsme.
[Quidway-l2tp1] tunnel name itsme
1.1.24 tunnel password
Syntax