Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-5
undo debugging dvpn { all | error | event { all | register | session | misc } |
hexadecimal | packet { all | control | data | ipsec } }
View
User view
Parameter
all: Enables all types of DVPN debugging.
error: Enables debugging for DVPN errors.
event: Enables debugging for DVPN events, such as register events, session events,
and misc events.
hexadecimal: Enables debugging for hexadecimal packets.
packet: Enables debugging for DVPN packets, such as control packets, data, and
IPSec packets.
Description
Use the debugging dvpn command to enable DVPN debugging.
Use the undo debugging dvpn command to disable DVPN debugging.
DVPN debugging is disabled by default.
Example
# Enable debugging for DVPN register events.
[Quidway] debugging dvpn event register
3.1.7 display dvpn ipsec-sa
Syntax
display dvpn ipsec-sa { all | dvpn-id dvpn-id [ private-ip private-ip ] }
View
Any view
Parameter
all: Specifies all the information about IPSec SA.
dvpn-id: ID of the DVPN domain ranging from 1 to 65,535.
private-ip: Specifies the private IP address.
Description
Use the display dvpn ipsec-sa command to display the specified IPSec SA
information.