Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 3 DVPN Configuration Commands

3Com Corporation

3-6

Example

# Display the IPSec SA information about DVPN 1.

<Quidway> display dvpn ipsec-sa dvpn-id 1

---------------------------

Session dvpn-id : 1

Session local : 10.0.0.3

Session remote : 10.0.0.2

sa mode : DVPN

---------------------------

[Inbound ESP SAs]

spi : 1549550209 (0x5c5c4281)

authentication-algorithm : ESP-AUTH-MD5

encryption-algorithm : ESP-ENCRYPT-3DES

life duration(bytes/sec): 0/180

remaining life duration(bytes/sec): 0/102

[Outbound ESP SAs]

spi : 2421434273 (0x905427a1)

authentication-algorithm : ESP-AUTH-MD5

encryption-algorithm : ESP-ENCRYPT-3DES

life duration(bytes/sec): 0/180

remaining life duration(bytes/sec): 0/102

3.1.8 display dvpn map

Syntax

display dvpn map { all | dvpn-id dvpn-id | public-ip public-ip }

View

Any view

Parameter

all: Displays all the established map information.

dvpn-id dvpn-id: ID of the DVPN domain ranging from 1 to 65,535.

public-ip public-IP: Specifies the public IP address.