Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-7
Description
Use the display dvpn map command to display information about maps in a DVPN
domain, such as private IP address, public IP address, port number, DVPN connection
state, DVPN connection type, and control ID.
Example
# Display all the map information.
[Quidway] display dvpn map all
vpn-id private-ip public-ip port state type control-id
--------------------------------------------------------------------
1 10.0.0.2 211.1.1.2 9876 SUCCESS C->S 70433124
2 11.0.0.2 211.1.1.2 9876 SUCCESS C->S 70432548
3.1.9 display dvpn session
Syntax
display dvpn session { all | dvpn-id dvpn-id [ private-ip private-ip ] }
View
Any view
Parameter
all: Displays all the established session information.
dvpn-id dvpn-id: ID of the DVPN domain ranging from 1 to 65,535.
private-ip private-IP: Specifies the private IP address (the IP address of the tunnel
interface).
Description
Use the display dvpn session command to display information about sessions the
device owns.
Example
# Display all the session information about DVPN 2.
<Quidway> display dvpn session dvpn-id 2
vpn-id private-ip public-ip port state type
-------------------------------------------------------------
2 11.0.0.2 211.1.1.2 9876 SUCCESS C->S
2 11.0.0.4 211.1.1.100 12289 SUCCESS C->C