Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-10
Description
Use the display dvpn online-user command to display the information about online
DVPN users. When the DVPN server authenticates clients, you can use this command
to check the users that pass AAA (authentication, authorization, and accounting)
authentication and are accessing the DVPN domains.
Example
# Display the information about online DVPN users.
<Quidway> dis dvpn online-user
username : dvpnuser@dvpn
authen-type : CHAP
DVPN total online-user count : 1
3.1.12 dvpn class
Syntax
dvpn class dvpn-class-name
undo dvpn class
View
System view
Parameter
dvpn-class-name: Name of the DVPN class to be created, a string with a maximum of
31 characters in length.
Description
Use the dvpn class command to create and enter a dvpn-class view.
Use the undo dvpn class command to remove a dvpn-class view.
Parameters such as the IP address of the DVPN server and the user name and
password for register are configured in DVPN class views. You cannot remove a DVPN
class applied to a tunnel interface.
No dvpn-class is configured by default.
Example
# Create a DVPN class named abc.
[Quidway] dvpn class abc