Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-15
Description
Use the dvpn policy command to apply a specified DVPN policy to a tunnel interface
that is of server type.
Use the undo dvpn policy command to disable a DVPN policy applied to a tunnel
interface.
Only one DVPN policy can be applied to each tunnel interface. Therefore, to apply a
new DVPN policy, you must disable the existing one first. You can apply a DVPN policy
to multiple tunnel interfaces.
You can apply the DVPN policy to only the tunnel interface that is of server type.
No DVPN policy is applied to the tunnel interface by default.
Related command: dvpn interface-type.
Example
# Apply the DVPN policy named abc to the tunnel interface.
[Quidway-Tunnel0] dvpn interface-type server
[Quidway-Tunnel0] dvpn policy abc
3.1.20 dvpn register-type
Syntax
dvpn register-type { forward | undistributed }*
undo dvpn register-type { forward | undistributed }*
View
Tunnel interface view
Parameter
forward: Specifies the DVPN server to forward all packets from the client, but not to
send packets redirecting the next hop to the client.
undistributed: Specifies the DVPN server not to distribute information about the client
to other clients.
Description
Use the dvpn register-type command to configure the type of the additional
information when a client registers with a DVPN server.
Use the undo dvpn register-type command to revert to the default type.
The DVPN server determines whether or not to send redirecting packets according to
the type of the additional information.