Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-18
Example
# Apply the DVPN class named abc to the tunnel interface.
[Quidway-Tunnel0] dvpn server abc
3.1.23 dvpn server authentication-client method
Syntax
dvpn server authentication-client method { chap | none | pap }
View
System view
Parameter
none: Specifies the DVPN server not to authenticate clients.
pap: Specifies the DVPN server to authenticate clients by using PAP (password
authentication protocol).
chap: Specifies the DVPN server to authenticate clients by using CHAP (challenge
authentication protocol).
Description
Use the dvpn server authentication-client method command to specify the default
way a DVPN server authenticates clients. If the DVPN domain to be accessed is not
specified when a client registers with a DVPN server, the DVPN server authenticates
the client in the default way. None, CHAP, and PAP are available for authentication at
present.
A DVPN server determines the way to authenticate clients according to the policy
applied to the DVPN domain. If the corresponding policy does not exist, the DVPN
server adopts the authentication in global configuration to authenticate clients.
A DVPN server authenticates clients by using the default PAP.
Example
# Specify CHAP as the default way to authenticate clients.
[Quidway] dvpn server authentication-client method chap
3.1.24 dvpn server map age-time
Syntax
dvpn server map age-time time
undo dvpn server map age-time