Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 DVPN Configuration Commands
3Com Corporation
3-23
3.1.31 reset dvpn all
Syntax
reset dvpn all dvpn-id
View
User view
Parameter
dvpn-id: ID of a DVPN domain.
Description
Use the reset dvpn all command to clear all operating information about a specified
DVPN domain and to initiate the DVPN domain.
Example
# Reset DVPN 2.
<Quidway> reset dvpn all 2
3.1.32 reset dvpn map
Syntax
reset dvpn map ip-address port [ control-id ]
View
User view
Parameter
ip-address: Public IP address.
port: Port number ranging from 1 to 65,535.
control-id: ID of the map ranging from 1 to 4,294,967,295.
Description
Use the reset dvpn map command to clear a specified map. This command also
clears the sessions related to the map (if the sessions exist). If the map is what the
client uses to register, this command clears all the sessions of the DVPN client who
registers by using the specified map.
Example
# Clear the map with an IP address of 10.0.0.2, a port number of 9876, and a control-id
of 123456.