Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-9
None
Description
Use the display qos cql command to view contents of customized queue lists (CPL).
Default values will not be displayed.
Related command: qos cq cql and qos cq.
Example
# Display information about a CQL.
[3Com ] display qos cql
Current CQL Configuration:
List Queue Params
2 3 Protocol ip fragments
3 0 Length 100
3 1 Inbound-interface Ethernet0
2.3.3 qos cq
Syntax
qos cq cql cql-index
undo qos cq
View
Interface view
Parameter
cql-index: CQL index, ranging 1 to 16.
Description
Use the qos cq cql command to apply the customized queue to an interface.
Use the undo qos cq command to restore the congestion management policy at the
interface to FIFO.
By default, the congestion management policy at the interfaces is FIFO.
One interface can only use one group of customized queues.
This command can configure multiple classification rules for each group in the CQL.
During traffic classification, the system matches packets along the rule link. If matching
a certain rule, a packet will be classified into the corresponding priority queue specified
by this rule. If not matching any rule, it will go to the default priority queue.