Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-11
Example
# Assign default queue 2 to CQL 5.
[3Com ] qos cql 5 default-queue 2
2.3.5 qos cql inbound-interface
Syntax
qos cql cql-index inbound-interface interface-type interface-number queue
queue-number
undo qos cql cql-index inbound-interface interface-type interface-number
View
System view
Parameter
cql-index: CQL index, in the range 1 to 16.
Interface-type: Interface type.
interface-number: Interface number.
queue-number: Queue number in the range 0 to 16.
Description
Use the qos cql inbound-interface command to establish classification rules based
on interfaces.
Use the undo qos cql inbound-interface command to delete corresponding
classification rules.
By default, no classification rules are configured.
This command matches a packet to a rule according to the interface that the packet
comes from. For the same group-number, this command can be repeatedly used,
establishing different classification rules for packets from different interfaces.
Related command: qos cql protocol, qos cql queue serving, qos cql queue
queue-length.
Example
# Specify a rule to put packets from tunnel 1 in queue 3.
[3Com ] qos cql 5 inbound-interface tunnel 1 queue 3
2.3.6 qos cql protocol
Syntax