Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-14
Syntax
qos cql cql-index queue queue-number serving byte-count
undo qos cql cql-index queue queue-number serving
View
System view
Parameter
cql-index: CQL index, ranging 1 to 16.
queue-number: Queue number, ranging 0 to 16.
byte-count: Number of bytes in packets that the given queue sends in each poll,
ranging 1 to 16,777,215 bytes. The default setting is 1500 bytes.
Description
Use the qos cql queue serving command to set the byte-count of the packets sent
from a given queue in each poll.
Use the undo qos cql queue serving command to restore the byte-count of sent
packets to the default value.
By default, byte-count is 1500.
Related command: qos cql inbound-interface, qos cql protocol, and qos cql queue
queue-length.
Example
# Specify byte-count of queue 2 in the CQL 5 to 1400.
[3Com ] qos cql 5 queue 2 serving 1400
2.4 WFQ Configuration Commands
2.4.1 display qos wfq interface
Syntax
display qos wfq interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type: Interface type.
interface-number: Interface number.