Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-19
pvc: Used for ATM interface only, i.e., policy configuration of specified PVC on
specified ATM interface can be displayed.
pvc-name: PVC name.
vpi/vci: VPI/VCI value pair. For detailed description, refer to the Parameter Description
about pvc command.
Description
Use the display qos cbq interface command to view CBQ configuration information
and operating status, the specified PVC on specified ATM interface or on all interfaces.
Example
[3Com ] display qos cbq interface
Interface: Ethernet10/2/0
Class Based Queuing: (Outbound queue: Total Size/Discards)
CBQ: 0/0
Queue Size: 0/0/0 (EF/AF/BE)
BE Queues: 0/0/256 (Active/Max active/Total)
AF Queues: 1 (Allocated)
Bandwidth(Kbps): 74992/75000 (Available/Max reserve)
2.5.4 display qos policy
Syntax
display qos policy { system-defined | user-defined } [ policy-name [ classifier
tcl-name ] ]
View
Any view
Parameter
system-defined: Policy pre-defined by the system.
user-defined: Policy pre-defined by the user.
policy-name: Policy name. If it is not specified, the configuration information of all the
policies pre-defined by the system or by the user will be displayed.
tcl-name: Class name in the policy.
Description
Use the display qos policy command to display the configuration information of the
specified class or all the classes and associated behaviors in the specified policy or all
policies.