Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-23
2.5.6 display traffic behavior
Command
display traffic behavior { system-defined | user-defined } [ behavior-name ]
View
Any view
Parameter
system-defined: Behavior pre-defined by the system.
user-defined: Behavior pre-defined by the user.
behavior-name: Behavior name. If it is not specified, the information of the behaviors
pre-defined by the system or by the user will be displayed.
Description
Use the display traffic behavior command to display the information of the traffic
behavior configured on the router.
Example
# Display information about user-defined traffic behavior.
[3Com ] display traffic behavior user-defined
User Defined Behavior Information:
Behavior: test
Assured Forwarding:
Bandwidth 30 (Kbps)
Discard Method: Tail
Queue Length : 64 (Packets)
General Traffic Shape:
CIR 30000 (bps), CBS 15000 (bit), EBS 0 (bit)
Queue length 50 (Packets)
Marking:
Remark MPLS EXP 3
Behavior: HUAWEI
Marking:
Remark IP Precedence 3
Committed Access Rate:
CIR 20000 (bps), CBS 15000 (bit), EBS 0 (bit)
Conform Action: pass
Exceed Action: discard
Expedited Forwarding:
Bandwidth 50 (Kbps) CBS 1500 (Bytes)