Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-25
Parameter
flow-interval: QoS policy traffic statistical interval, in the range 1 to 30 minutes. The
default is 5 minutes.
update-interval seconds: Optional, QoS policy rate updating interval in seconds. It
takes the value of 10, 15, 20, 30, or 60 and defaults to 10. The smaller the interval, the
faster the updating rate.
Description
Use the flow-interval qos command to configure QoS policy traffic statistical interval
and QoS policy rate updating interval.
Use the undo flow-interval qos command to restore the default.
QoS traffic statistical information is displayed along with QoS policy configuration
displayed by the display qos policy command.
Related command: display qos policy.
Example
# Set the QoS policy traffic statistical interval to 10 minutes, and rate updating interval
to 15 seconds.
[3Com ] flow-interval qos 10 update-interval 15
[3Com ] display qos policy interface e0/0/0 outbound
Interface: Ethernet0/0/0
Direction: Outbound
Policy: test
Classifier: default-class
Matched : 0/0 (Packets/Bytes)
10 Min Rate: 0 bps
Rule(s) : if-match any
Behavior: be
-none-
Classifier: test
Matched : 0/0 (Packets/Bytes)
10 Min Rate: 0 bps
Operator: AND
Rule(s) : if-match any
Behavior: test