Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-28
Atm1/0/0, pvc 0/99
Direction: Outbound
Policy: test
Classifier: test
Matched : 0/0 (Packets/Bytes)
1 Min Rate: 0 bps
Operator: AND
Rule(s) : if-match destination-mac ffff-ffff-ffff
if-match inbound-interface e0/0/0
Behavior: test
-none-
In fact, if-match destination-mac is ineffective on ATM PVC. Therefore, the rule on the
ATM PVC is like this:
Classifier: test
Matched : 0/0 (Packets/Bytes)
1 Min Rate: 0 bps
Operator: AND
Rule(s) : if-match inbound-interface e0/0/0
Behavior: test
-none-
2.5.11 if-match { destination-mac | source-mac }
Syntax
if-match [not ] { destination-mac | source-mac } mac-address
undo if-match [ not ] { destination-mac | source-mac } mac-address
View
Class view
Parameter
not: Not match the class.
mac-address: MAC address.
Description
Use the if-match { destination-mac | source-mac } command to define match rule of
destination or source MAC address.