Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-36
Example
# Define the match rule of class1 as matching the packets with the precedence value as
1 or 6.
[3Com ] traffic classifier class1
[3Com -classifier-class1] if-match ip-precedence 1 6
2.5.21 if-match outbound-interface
Syntax
if-match [ not ] outbound-subinterface interface-type
interface-number.subinterface-number
undo if-match [ not ] outbound-subinterface interface-type
interface-number.subinterface-number
View
Class view
Parameter
interface-type: Interface type, which must support subinterfaces. It can be GE, FE, FR,
or MFR only at present.
interface-number.subinterface-number: Subinterface number.
Description
Use the if-match outbound-subinterface command to define an outbound
subinterface matching rule for the class.
Use the undo if-match inboud-subinterface command to delete an outbound
subinterface matching rule from the class.
The subinterface specified in this command must be one that already existed. After this
subinterface is deleted, the rule is deleted.
A policy containing a rule defined using this command must be applied to the main
interface where the specified subinterface is located. If the policy is applied to a
subinterface or to FR PVC, the rule cannot take effect.
Related command: traffic classifier.
Example
# Define an outbound subinterface matching rule for class1.
[3Com ] traffic classifier class1
[3Com -classifier-class1] if-match outbound-subinterface
GigabitEthernet6/0/0.1