Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-42
View
System view
Parameter
policy-name: Policy name.
Description
Use the qos policy command to define a policy and enter policy view.
Use the undo qos policy command to delete a policy.
The policy cannot be deleted if it is applied on an interface. It is necessary to remove
application of the policy on the current interface before deleting it via the undo qos
policy command.
policy-name should not be the policy defined by the system. The “default” is the policy
defined by the system.
Related command: classifier behavior and qos apply policy.
Example
# Define a policy named as HUAWEI.
[3Com ] qos policy HUAWEI
[3Com -qospolicy-HUAWEI]
2.5.29 queue af
Syntax
queue af bandwidth { bandwidth | pct percentage }
undo queue af
View
Traffic behavior view
Parameter
bandwidth: Bandwidth in Kbps, in the range of 8 to 1000000.
pct percentage: Percentage of the available bandwidth configured, in the range of 1 to
100.
Description
Use the queue af command to configure the class to perform the assured-forwarding
and the minimum bandwidth used.
Use the undo queue af command to cancel the configuration.