Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Congestion Management Configuration
Commands
3Com Corporation
2-51
Description
Use the traffic classifier command to define a class and enter the class view.
Use the undo traffic classifier command to delete a class.
By default, the relation is operator and.
tcl-name shall not be the classes pre-defined by the system. The classes defined by the
system include: default-class, ef, af1, af2, af3, af4, ip-prec0, ip-prec1, ip-prec2,
ip-prec3, ip-prec4, ip-prec5, ip-prec6, ip-prec7, mpls-exp0, mpls-exp1, mpls-exp2,
mpls-exp3, mpls-exp4, mpls-exp5, mpls-exp6, and mpls-exp7.
Related command: qos policy, qos apply policy, and classifier behavior.
Example
# Define a class named as class 1.
[3Com ] traffic classifier class1
[3Com -classifier-class1]
2.5.40 traffic-policy
Syntax
traffic-policy policy-name
undo traffic-policy
View
Traffic behavior view
Parameter
policy-name: Specifies a policy by its name.
Description
Use the traffic-policy command to associate a sub-policy to the behavior.
Use the undo traffic-policy command to remove the association.
After defining a class using the traffic classifier command, you can have it perform the
associated behavior defined in its policy and in addition, use a sub-policy to
sub-classify the class, having it perform the behavior defined in the sub-policy. You can
thus implement policy embedding.
Related command: traffic behavior, traffic classifier.
Example
# Embed the sub-policy Child in the policy for the traffic behavior database
[3Com ] traffic behavior database