Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 MPLS QoS Configuration Commands
3Com Corporation
5-2
View
System view
Parameter
cql-index: Group number of precedence list, in the range of 1 to 16.
mpls-experimental-number: EXP domain of MPLS packet, in the range of 0 to 7.
queue-number: Queue number, in the range of 0 to 16.
Description
Use the qos cql protocol mpls exp command to configure classification rule based on
the MPLS protocol.
Use the undo qos cql protocol mpls exp command to delete the corresponding
classification rule.
The system matches packets in the sequence that rules are configured. When the
packet is found to match a rule, the entire searching process comes to an end.
For the same group-number, this command can be used repeatedly to establish
multiple types of classification rules for IP packets.
Related command: qos cq.
Example
# Configure classification rule based on the MPLS protocol and sets EXP value of
MPLS to 1.
[3Com ] qos cql 10 protocol mpls exp 1
5.1.3 qos pql protocol mpls exp
Syntax
qos pql pql-index protocol mpls exp mpls-experimental-value queue { top | middle |
normal | bottom }
undo qos pql pql-index protocol mpls exp mpls-experimental-value
View
System view
Parameter
pql-index: Group number of priority list, in the range of 1 to 16.
mpls-experimental-value: EXP domain of MPLS packet, in the range of 0 to 7.
queue top | middle | normal | bottom: Top/middle/normal/bottom priority queue.