Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Backup Center Configuration Commands
3Com Corporation
1-5
Example
# Configure interface Serial 0/0/0 to use interface Serial 1/0/0 for back up, and assign it
bandwidth for backup load sharing.
[3Com ] interface serial0/0/0
[3Com -Serial0/0/0] standby interface serial1/0/0 50
[3Com -Serial0/0/0] standby bandwidth 10000
[3Com -Serial0/0/0] standby threshold 80 50
1.1.5 standby interface
Syntax
standby interface type number [ priority ]
undo standby interface type number
View
Interface view
Parameter
type: Interface type.
number: Interface number.
priority: Priority of the standby interface, in the range 0 to 255. It defaults to 0. The
greater the value is, the higher the priority is.
Description
Use the standby interface command to specify a physical interface to back up the
interface.
Use the undo standby interface command to remove the specified standby interface.
By default, no standby interface is specified.
You can configure multiple standby interfaces for a main interface. The order in which
they are used depends on the assigned priority. The standby interface with higher
priority is used first.
Example
# Specify interface Serial 1/0/0 to back up interface Serial 0/0/0, and assign it the
priority of 50.
[3Com -Serial0/0/0] standby interface serial1/0/0 50
1.1.6 standby threshold
Syntax