Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 1 Backup Center Configuration Commands

3Com Corporation

1-8

When the main interface participates in backup load sharing, the backup center

automatically checks the traffic size on the main interface at intervals configured using

this command.

Before you can use this command, you must use the standby interface command to

specify physical interfaces or logical channels to back up the interface.

Example

# Set Serial 1/0/0 to the standby interface of Serial 0/0/0, and configure the backup

bandwidth of the main interface on Serial 0/0/0.

[3Com ] interface serial 0/0/0

[3Com -Serial0/0/0] standby interface serial10/0/0 50

[3Com -Serial0/0/0] standby bandwidth 10000

[3Com -Serial0/0/0] standby threshold 80 50

[3Com -Serial0/0/0] standby timer flow-check 60