Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 VRRP Configuration Commands
3Com Corporation
2-1
Chapter 2 VRRP Configuration Commands
2.1 VRRP Configuration Commands
2.1.1 debugging vrrp
Syntax
debugging vrrp { packet | state }
undo debugging vrrp { packet | state }
View
User view
Parameter
packet: Enables VRRP packet debugging.
state: Enables VRRP state debugging.
Description
Use the debugging vrrp command to enable VRRP debugging.
Use the undo debugging vrrp command to disable VRRP debugging.
By default, VRRP debugging is disabled.
Example
# Enable VRRP packet debugging.
[3Com ] debugging vrrp packet
2.1.2 display vrrp
Syntax
display vrrp [ interface interface-name [ virtual-router-ID ] ]
View
Any view
Parameter
interface-name: Specifies an interface by its name. The type of the interface must be
Ethernet.
virtual-router-ID: Standby group number.