Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 DCC Configuration Commands
3Com Corporation
1-1
Chapter 1 DCC Configuration Commands
1.1 DCC Configuration Commands
1.1.1 debugging dialer
Syntax
debugging dialer { all | event | packet }
View
System view
Parameter
event: Enables DCC event debugging.
packet: Enables DCC packet debugging.
Description
Use the debugging dialer command to enable DCC debugging.
Example
None
1.1.2 dialer bundle
Syntax
dialer bundle number
undo dialer bundle
View
Dialer interface view
Parameter
number: Number of dialer bundle, ranging from 1 to 255.
Description
Use the dialer bundle command to configure a dialer bundle used by a dialer interface.
Use the undo dialer bundle command to disassociate the dialer bundle from the dialer
interface.
By default, the Resource-Shared DCC is not enabled, neither is dialer bundle specified.