Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 DCC Configuration Commands
3Com Corporation
1-6
1.1.7 dialer disconnect
Syntax
dialer disconnect interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type: Specifies an interface together with interface-number.
interface-number: Specifies an interface together with interface-type.
Description
Use the dialer disconnect command to clear the dial-up link or the session link on the
specified interface at the PPPoE/PPPoA client.
The type of the specified interface can be dialer, D channel (on a PRI or BRI interface
for example), or B channel (on an RI, BRI, AUX, Serial, or AM interface for example).
Related command: debugging dialer.
Example
# Clear the dial-up link or the session link on the specified interface at the PPPoE client.
[Router] dialer disconnect interface dialer0
# Clear the specified D channel.
[Router] dialer disconnect interface Serial1/0/0:15
# Clear the specified B channel.
[Router] dialer disconnect interface Serial1/0/0:2
1.1.8 dialer enable-circular
Syntax
dialer enable-circular
undo dialer enable-circular
View
Physical or dialer interface view
Parameter
None
Description