Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-23
Parameter
None
Description
Use the display ftp-server command to view the parameters of the current FTP server.
After you configure FTP parameters, you can verify them with this command.
Example
# Display the configured FTP server parameters.
<3com> display ftp-server
Ftp server is running
Max user number 1
User count 1
Timeout(minute) 30
P ut Method fast
The information indicates that the FTP server is running with support to only one login
user; now one login user is present; timeout of the user is 30 minutes, and file transfer
mode is fast.
4.3.2 display ftp-user
Syntax
display ftp-user
View
Any view
Parameter
None
Description
Use the display ftp-user command to view the parameters of the current FTP users.
Example
# Display the settings of the FTP users.
<3com> display ftp-user
Username Host IP port Idle HomeDir
3com 10.110.3.5 1074 2 flash:/3com
The information indicates that a connection is present between FTP user 3com and the
FTP server. The IP address of the remote host is 10.110.3.5 and the remote port