Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 DCC Configuration Commands
3Com Corporation
1-16
1.1.19 dialer timer wait-carrier
Syntax
dialer timer wait-carrier seconds
undo dialer timer wait-carrier
View
Physical or dialer interface view
Parameter
seconds: Waiting time in seconds, ranges from 0 to 65535. By default, the time waiting
for a call connection is 60 seconds.
Description
Use the dialer timer wait-carrier command to configure the timeout time of
wait-carrier timer.
Use the undo dialer timer wait-carrier command to restore the default time of the
timer.
Wait-carrier timer begins to time after the DCC call is initiated. If the call connection fails
to be set up within the timeout time of this timer, the call will be terminated.
If the connection for a call is not established yet within the specified time, DCC will
terminate the call.
Example
# Set the maximum duration of the time that Serial 0/0/0 waits for call to establish to be
100 seconds.
[3Com -Serial0/0/0] dialer timer wait-carrier 100
1.1.20 dialer timer warmup
Syntax
dialer timer warmup seconds
undo dialer timer warmup
View
System view
Parameter
seconds: Length of the warmup timer. It defaults to 30 seconds.