Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-24
number is 1074. The authorized path is flash:/3com and the user has not sent any
service request to the FTP server for two minutes.
 Note:
When the length of the authorized directory exceeds 20 characters, the in-between
characters except for the first and the last characters are displayed as tildes (~), such
as flash:/1/2/3/4/5/6~5.
4.3.3 display ftp-server source-ip
Syntax
display ftp-server source-ip
View
Any view
Parameter
None
Description
Use the display ftp-server source-ip command to display the source IP address
configured for the FTP server.
If a source interface has been specified for the FTP server, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the FTP server, 0.0.0.0 is displayed.
Example
# Display the current source IP address of the FTP server.
<Router> display ftp-server source-ip
The source IP specified is 0.0.0.0
4.3.4 ftp server enable
Syntax
ftp server enable
undo ftp server