Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 1 DCC Configuration Commands

3Com Corporation

1-20

[3Com -acl-adv-3101] rule permit ip source 0.0.0.0 255.255.255.255 destination

0.0.0.0 255.255.255.255

[3Com -acl-adv-3101] quit

[3Com ] dialer-rule 1 acl 3101

[3Com ] interface serial1/0/0

[3Com -Serial1/0/0] dialer-group 1

1.1.24 display dialer

Syntax

display dialer [ interface interface-type interface-number ]

View

Any view

Parameter

interface-type: Interface type.

interface-number: Interface number.

Description

Use the display dialer command to view information on DCC interfaces.

By default, information on all DCC interfaces is displayed.

Related command: dialer timer idle, dialer timer compete, dialer timer

wait-for-carrier, dialer timer enable.

Example

# Display information on dialer interfaces.

[3Com ] display dialer

Dialer0 - dialer type = Dialer

Dialer Route:

NextHop_address Dialer_Numbers

Dialer number 003

Dialer Timers(Secs):

Auto-dial:300 Compete:20 Enable:5

Idle:120 Wait-for-Carrier:60

Total Channels:30 Free Channels:29