Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 DCC Configuration Commands
3Com Corporation
1-21
Table 1-1 Description on the fields of the display dialer command
Field Description
NextHop address
Remote address associated with a dialer
route on the interface
Dialer Number
Dial string corresponding to the dialer
route
Dialer Timers(Secs) Setting of the dialer timer
Auto-dial
Time set by the dialer timer autodial
command
Compete
Time set by the dialer timer compete
command
Enable
Time set by the dialer timer enable
command
Idle
Time set by the dialer timer idle
command
Wait for carrier
Time set by the dialer timer
wait-carrier command
Total Channels Total number of channels
Free Channels Number of free channels
1.1.25 interface dialer
Syntax
interface dialer number
undo interface dialer number
View
System view
Parameter
number: Interface number; its value range varies with router model.
Description
Use the interface dialer command to create a dialer circular group for the Circular
DCC, or configure a dialer interface for the Resource-Shared DCC.
Use the undo interface dialer command to cancel the existing setting.
By default, no dialer interface is defined.