Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 Modem Configuration Commands
3Com Corporation
3-1
Chapter 3 Modem Configuration Commands
3.1 Modem Configuration Commands
3.1.1 debugging modem
Syntax
debugging modem
View
User view
Parameter
None
Description
Use the debugging modem command to enable Modem debugging.
According to the information output after executing this command, the user can make
sure whether the correct Modem script has been specified for a particular event.
Example
None
3.1.2 modem
Syntax
modem [ both | call-in | call-out ]
undo modem [ both | call-in | call-out ]
View
User-interface view
Parameter
both: Permits both modem call-in and modem call-out.
out: Permits only modem call-in.
call-out: Permits only modem call-out.
Description
Use the modem command to enable modem call-in and call-out on the interface.