Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-25
View
System view
Parameter
None
Description
Use the ftp server enable command to enable the FTP server to allow login of FTP
users.
Use the undo ftp server command to disable the FTP server as well as login of FTP
users.
By default, the FTP server is disabled.
Example
# Disable the FTP server.
[3com] undo ftp server
4.3.5 ftp-server source-interface
Syntax
ftp-server source-interface interface-type interface-number
undo ftp-server source-interface
View
System view
Parameter
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the ftp-server source-interface command to specify a source interface, which
must be an existing local interface, for the FTP server. After that, the IP address of the
specified interface is used as the source IP address in each packet sent by the FTP
server.
Use the undo ftp-server source-interface command to delete the source interface
specified for the FTP server. After that, the source IP address in each packet sent by
the FTP server is that of the outgoing interface where the packet is sent out.
By default, the source IP address in each packet sent by the FTP server is the IP
address of the interface where the packet is sent out.