Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 Modem Configuration Commands
3Com Corporation
3-3
 Note:
If the configuration of this command is not consistent with the current answer state of
the connected modem, anomalies may occur.
Related command: modem.
Example
# Set the answer mode of the modem connected to the asynchronous serial interface
UI-TTY1 to auto.
[3Com -ui-tty1] modem auto-answer
3.1.4 script trigger connect
Syntax
script trigger connect script-name
undo script trigger connect
View
User interface view
Parameter
script-name: Name of Modem script.
Description
Use the script trigger connect command to configure the Modem script that will be
executed once an incoming call connection is established.
Use the undo script trigger connect command to cancel this feature.
By default, no Modem script is configured.
If this command is configured, the specified script will be executed anytime when an
incoming call connection is established.
Related command: script-string, start-chat, script trigger login, script trigger
connect, script trigger logout, script trigger dial, script trigger init.
Example
# Specify the script “example” to be executed anytime an incoming call connection is
established.
[3Com -ui-tty1] script trigger connect example