Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 Modem Configuration Commands
3Com Corporation
3-10
When a modem line is active, that is, when the modem detects the carrier or data is
being received, you may enable callback. As the service modem-callback command
uses modem scripts to implement callback before entering PPP, it enables callback
before accounting is started. This can thus help you save cost.
Example
# Enable the callback function.
[3Com ] service modem-callback
3.1.11 start-script
Syntax
start-script script-name number
View
User view
Parameter
script-name: Name of Modem script.
number: Interface number of the script.
Description
Use the start-script command to configure executing the specified Modem script on an
interface.
This command provides the user with means of instantly executing the Modem script. If
an other script is being executed on the corresponding interface, this command will not
be executed and an error will be reported.
Related command: script-string.
Example
# Execute the specified Modem script “example” on the interface 1.
<3Com > start-script example 1