Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-33
4.4.10 disconnect
Syntax
disconnect
View
FTP client view
Parameter
None
Description
Use the disconnect command to disconnect from the remote FTP server but remain in
FTP client view.
This command terminates both control connection and data connection to the remote
FTP server.
Example
# Disconnect from the remote FTP server but remain in FTP client view.
[ftp] disconnect
[ftp]
4.4.11 display ftp source-ip
Syntax
display ftp source-ip
View
Any view
Parameter
None
Description
Use the display ftp source-ip command to display the source IP address configured
for the FTP client.
If a source interface has been specified for the FTP client, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the FTP client, 0.0.0.0 is displayed.