Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-36
undo ftp source-interface
View
System view
Parameter
interface-type interface-number: Specifies a source interface by its type and number.
Description
Use the ftp source-interface command to specify a source interface, which must be
an existing local interface, for the FTP client. After that, the IP address of the specified
interface is used as the source IP address in each packet sent by the FTP client.
Use the undo ftp source-interface command to delete the source interface specified
for the FTP client. After that, the source IP address in each packet sent by the FTP
client is that of the outgoing interface where the packet is sent out.
By default, the source IP address in each packet sent by the FTP client is the IP
address of the interface where the packet is sent out.
 Note:
You may specify a source IP address for the packets sent by the FTP client with the ftp
source-interface command or with the ftp source-ip command. If both commands are
configured, the one configured later overrides.
Example
# Set the source interface for the FTP client to ethernet0/0/0.
[Router] ftp source-interface ethernet0/0/0
4.4.16 ftp source-ip
Syntax
ftp source-ip ip-address
undo ftp source-ip
View
System view
Parameter
ip-address: Source IP address.