Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-44
undo verbose
View
FTP client view
Parameter
None
Description
Use the verbose command to enable the verbose function to view information from the
FTP server.
Use the undo verbose command to disable the verbose function.
By default, the verbose function is disabled.
Example
# Enable the verbose function.
[ftp] verbose
4.5 TFTP Client Configuration Commands
4.5.1 display tftp source-ip
Syntax
display tftp source-ip
View
Any view
Parameter
None
Description
Use the display tftp source-ip command to display the source IP address configured
for the TFTP client.
If a source interface has been specified for the TFTP client, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the TFTP client, 0.0.0.0 is displayed.
Example
# Display the current source IP address of the TFTP client.
<Router> display tftp source-ip