Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series
161162163164165166167168169170
3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-47
Example
# Use 192.168.0.1 as the source IP address that the TFTP client uses when accessing
the TFTP server at 192.168.0.2.
<Router> tftp 192.168.0.2 source-ip 192.168.0.1
4.5.5 tftp-server acl
Syntax
tftp-server acl acl-number
View
System view
Parameter
acl-number: IP ACL number in the range 2000 to 2999.
Description
Use the tftp-server acl command to reference an ACL to control access to the TFTP
server.
Related command: tftp.
Example
# Reference ACL 2001 to control access to the TFTP server.
[3com] tftp-server acl 2001
4.5.6 tftp source-interface
Syntax
tftp source-interface interface-type interface-number
undo tftp source-interface
View
System view
Parameter
interface-type interface-number: Specifies a source interface by its type and number.
Description
Use the ftp source-interface command to specify a source interface, which must be
an existing local interface, for the TFTP client. After that, the IP address of the specified
interface is used as the source IP address in each packet sent by the TFTP client.