Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-50
4.7 Configuration File Management Commands
4.7.1 display current-configuration
Syntax
display current-configuration [ controller | interface interface-type
[ interface-number ] | configuration [ isp | luser | radius-template | system |
user-interface| ] ] [ | [ begin | include | exclude ] string ] [ by-linenum ]
View
Any view
Parameter
controller: Displays the controller configurations.
interface: Displays the interface configurations.
interface-type: Interface type.
interface-number: Interface number.
configuration: Displays the specified configurations.
isp: Display the ISP configurations.
luser: Displays the local user configurations.
radius-template: Displays the radius-template configurations.
system: Displays the system configurations.
user-interface: Displays the user interface configuration.
|: Uses a regular expression to filter output.
begin: Displays the configurations beginning with the specified characters (string).
include: Displays the configurations that include the specified characters (string).
exclude: Displays the configurations that exclude the specified characters (string).
string: The regular expression.
by-linenum: Identifies each line of displayed current configuration information with a
line number.
Description
Use the display current-configuration command to view the running configurations
on the router.
The current parameters that take the default values are not displayed.
After you complete some configuration tasks, you can execute the display
current-configuration command to verify them. You probably cannot see some