Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 4 File Management Commands
3Com Corporation
4-56
4.7.5 reset saved-configuration
Syntax
reset saved-configuration
View
User view
Parameter
None
Description
Use the reset saved-configuration command to delete the configuration file loaded at
this startup from the Flash.
This command could not have the router boot with empty configuration at next startup.
Use this command with caution and under the guidance of technical staff.
You may use this command to delete the configuration file before deploying the router
in a new application environment where new configuration is required.
Related command: save, display current-configuration, display
saved-configuration.
Example
# Delete the configuration file loaded at this startup from the Flash.
<3com> reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N]y
Configuration in the device is being cleared.
Please wait ...
....
Configuration in the device is cleared.
4.7.6 save
Syntax
save [file-name | safely ]
View
Any view