Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-1
Chapter 5 User Interface Configuration
Commands
5.1.1 accounting commands
Syntax
accounting commands scheme
undo accounting commands scheme
View
User interface view
Parameter
scheme: Implements per-command accounting using the scheme specified by the
scheme command, which can only be the terminal access controller access control
system (TACACS) scheme currently.
Description
Use the accounting commands command to enable the system to start per-command
accounting for terminal users logged into the user interface.
Use the undo accounting commands command to stop per-command accounting for
terminal users.
By default, per-command accounting is not configured.
At present, per-command accounting for terminal users is available with the
HWTACACS protocol only.
After this function is enabled on a user interface, a command statistics packet is sent to
a TACACS accounting server for statistics and accounting each time a login terminal
user executes a command.
When the TACACS accounting server becomes unavailable, the terminal user can
execute commands normally but with per-command accounting stopped. The system,
however, does not record or inform the terminal user of this event.
Example
# Perform per-command accounting on the VTY 0 user interface.
[3com] user-interface vty 0
[3com-ui-vty0] accounting commands scheme