Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-4
command-authorization: Performs command line authorization. HWTACACS allows
per-command authorization. An input command is executed only after it passes
authorization.
none: Performs no authentication.
Description
Use the authentication-mode command to set the authentication mode at login.
Use the authentication-mode none command to set the authentication mode to none,
that is, no authentication at login.
Use the undo authentication-mode command to restore the default.
By default, the authentication mode is password for TTY (asynchronous interface),
VTY, and AUX user interfaces and is none for other user interfaces.
Related command: set authentication password.
Example
# Enable local password authentication.
[3com-ui0] authentication-mode password
5.1.5 auto-execute command
Syntax
auto-execute command command
undo auto-execute command
View
User interface view
Parameter
command: Command to be automatically executed.
Description
Use the auto-execute command command to set a command to be automatically
executed.
Use the undo auto-execute command command to disable command
auto-execution.
By default, command auto-execution is disabled.
You should be aware of the following restrictions before using the auto-execute
command command:
z You cannot execute the auto-execute command command on the console port.