Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-6
Description
Use the databits command to set data bits on the user interface.
Use the undo databits command to restore the default, or eight.
The configuration can take effect only when the serial interface works in the
asynchronous flow mode.
Example
# Set data bits to 5.
[3com-ui-aux0] databits 5
5.1.7 debugging vty
Syntax
debugging vty { fsm | negotiate }
undo debugging vty { fsm | negotiate }
View
User view
Parameter
fsm: Telnet state machine debugging.
negotiate: VTY option negotiation debugging.
Description
Use the debugging vty command to enable VTY debugging.
Use the undo debugging vty command to disable VTY debugging.
Example
# Enable VTY option negotiation debugging.
<3com> debugging vty negotiate
5.1.8 display configure-user
Syntax
display configure-user
View
Any view