Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-7
Parameter
None
Description
Using the display configure-user command, you can view information about the user
who is currently authorized to configure the equipment.
Users can configure the same equipment through the Console port, the AUX port, the
VTY interface (in cases such as Telnet and SSH) and others. If configurations by these
various means are permitted to be conducted simultaneously, the configuration of one
user is liable to overwrite others’ configuration. For this reason, the VRP requires that
only one user should have right to modify configurations of the equipment at a time. In
other words, once a user is performing configurations on the equipment, other users,
including those with higher priorities, are not permitted to configure the equipment at
that very moment, but rather wait till the user currently conducting the configurations
quitting or timed out of the system.
Example
# Display information about the user who is currently authorized to configure the
equipment.
<3com> display configure-user
If the adopted authentication does not require a username, the actual display shall be:
The information of current configuration user:
UI Delay Type Ipaddress Username
34 VTY 0 00:00:04 TEL [phone]
If the login authentication otherwise requires a username, the actual display shall be:
The information of current configuration user:
UI Delay Type Ipaddress Username
34 VTY 0 00:00:05 TEL [phone] test
5.1.9 display user-interface
Syntax
display user-interface [ type-name ] [ number ] [summary]
View
Any view
Parameter
type-name: User interface type. Together with a user interface index, it specifies a user
interface.