Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-11
100.00% packet loss
<3com>
If the ping task is terminated and return to the current view, the configuration is correct.
5.1.12 flow-control
Syntax
flow-control { hardware | software | none }
undo flow-control
View
User interface view
Parameter
none: No flow control.
software: Software flow control.
hardware: Hardware flow control , only valid on console and AUX ports.
Description
Use the flow-control command to configure flow control mode.
Use the undo flow-control command to restore the default.
By default, TTY interfaces use hardware flow control.
The configuration can become effective only when the serial interface works in the
asynchronous flow mode.
When the system is outputting, you may press <Ctrl+S> to halt outputting and <Ctrl+Q>
to continue.
Example
# Configure software flow control in user interface view.
[3com-ui-console0] flow-control software
5.1.13 free user-interface
Syntax
free user-interface [ type-name ] number
View
User view