Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-15
CTRL_O: Assigns the hot key <CTRL+O> to a command.
CTRL_T: Assigns the hot key <CTRL+T> to a command.
CTRL_U: Assigns the hot key <CTRL+U> to a command.
command_text: The command line associated with the hot key.
Description
Use the hotkey command to assign a hot key to a command line.
Use the undo hotkey command to restore the default assignment scheme of the
system: <CTRL_G> to display current-configuration, <CTRL_L> to display ip
routing-table, <CTRL_O> to undo debugging all, and null to other two hot keys.
You can customize this scheme however.
Example
# Assign the hot key < CTRL_T> to the display tcp status command.
[3Com] hotkey ctrl_t display tcp status
[3Com] display hotkey
----------------- HOTKEY -----------------
=Defined hotkeys=
Hotkeys Command
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debug all
CTRL_T display tcp status
=Undefined hotkeys=
Hotkeys Command
CTRL_U NULL
=System hotkeys=
Hotkeys Function
CTRL_A Move the cursor to the beginning of the current line.
CTRL_B Move the cursor one character left.
CTRL_C Stop current command function.
CTRL_D Erase current character.
CTRL_E Move the cursor to the end of the current line.
CTRL_F Move the cursor one character right.
CTRL_H Erase the character left of the cursor.
CTRL_K Kill outgoing connection.
CTRL_N Display the next command from the history buffer.
CTRL_P Display the previous command from the history buffer.
CTRL_R Redisplay the current line.