Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-22
z 57600 bps
z 115200 bps
Example
# Set the transmission rate on the user interface to 19200 bps.
[3com-ui-aux0] speed 19200
5.1.27 stopbits
Syntax
stopbits { 1.5 | 1 | 2 }
undo stopbits
View
User interface view
Parameter
1.5: 1.5 stop bits.
1: 1 stop bit.
2: 2 stop bits.
Description
Use the stopbits command to set the stop bits on the user interface.
Use the undo stopbits command to restore the default, or one stop bit.
Only when the serial interface works in asynchronous flow mode can the configuration
be effective.
Example
# Use 1.5 stop bits on the user interface.
[3com-ui-vty0] stopbits 1.5
5.1.28 user privilege
Syntax
user privilege level level
undo user privilege level
View
User interface view