Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-23
Parameter
level: Command level in the range 0 to 3.
Description
Use the user privilege command to configure the command level that the login users
on the current user interface can access.
Use the undo user privilege command to cancel the current setting.
By default, the default command level is three for the console user interface and zero
for other user interfaces.
When a user logs onto the router from a user interface, the command level that the user
can access depends on two points. One is the command level that the user itself can
access, the other is the command level assigned to this user interface. If the two levels
are different, the former is taken. For example, the command level of the VTY 0 user
interface is two; however, user 007 has the right to access command level 3. If 007 logs
in from VTY 0 user interface, he can access commands at level 3 and lower.
Example
# Set the command level that the users logging in from VTY 0 to two.
[3com-ui-vty0] user privilege level 2
# After the user telnets to the router from VTY 0, the terminal displays:
<3com>
5.1.29 user-interface
Syntax
user-interface [ type-keyword ] number [ ending-number ]
View
System view
Parameter
type-keyword: User interface type.
number: The first user interface to be configured.
ending-number: The last user interface to be configured.
Description
Use the user-interface command to enter single-user interface view or multi-user
interface view.