Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 5 User Interface Configuration Commands
3Com Corporation
5-24
You can specify a user interface view by its relative index or absolute index. In the
former case, you need also to specify the type of the user interface whereas in the latter
case you do not need to do so. For more information on the numbering rules, refer to
the section “Numbering User Interfaces” in the chapter “User Interface Configuration”
of V 2.41 Operation Manual – System Management.
Example
# Enter the view of the console 0 user interface.
[3com] user-interface console 0
[3com-ui-console0]
# Enter the view of the VTY 0 user interface.
[3com] user-interface vty 0
[3com-ui-vty0]
# Enter the view of the user interfaces VTY 0 through VTY 3.
[3com] user-interface vty 0 3
[3com-ui-vty0-3]
# Enter user interface view to configure user interfaces 0 through 3. The types of the
interfaces include console, AUX and VTY. The actual user interface types however
depend on the interfaces provided by the router. If the router does not provide the AUX
port, this example configures one console user interface and three VTY user interfaces.
[3com] user-interface 0 3
[3com-ui0-3]