Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 NTP Configuration Commands
3Com Corporation
6-1
Chapter 6 NTP Configuration Commands
6.1.1 debugging ntp-service
Syntax
debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
undo debugging ntp-service { access | adjustment | authentication | event | filter |
packet | parameter | refclock | selection | synchronization | validity | all }
View
User view
Parameter
access: NTP access control debugging.
adjustment: NTP clock adjustment debugging.
all: All NTP debugging.
authentication: NTP authentication debugging.
event: NTP event debugging.
filter: NTP filter information debugging.
packet: NTP packet debugging.
parameter: NTP clock parameter debugging.
refclock: NTP reference clock debugging.
selection: NTP clock selection debugging.
synchronization: NTP clock synchronization debugging.
validity: Validity debugging of NTP remote hosts.
Description
Use the debugging ntp-service command to enable NTP service debugging.
Use the undo debugging ntp-service command to disable NTP service debugging.
By default, all debugging is disabled.
Example
# Enable NTP access control debugging.
<3com> debugging ntp-service access